基于电力线载波通信的智能调光灯的设计文献综述

 2022-03-28 08:03

摘要

随着科技的飞速发展,人们对智能家居中照明的高效控制和照明效果多样化的要求不断提高,同时对网络的依赖也越来越大,智能照明系统应运而生。 智能照明系统充分利用电子技术、通信技术和计算机网络技术,运用有效的管理和控制策略,实现高效、环保、节能、舒适的照明效果。基于电力线载波技术的智能调光控制系统可以充分利用现有的电力线网络传送数据,不仅无需重新铺设专用的线缆,也不占用无线通信宝贵的频道资源,符合家庭网络通信的特点,同时电力线调制解调模块的成本也远低于各种无线模块(如 Zigbee 、 Wi-Fi 、 2.4G 等),这无疑成为了解决智能家居系统中数据传输介质的最佳方案之一。

关键词:智能照明系统、电力线载波技术、电力线调制解调模块

Abstract

With the rapid development of science and technology, people#39;s requirements for the efficient control and diversification of lighting effect in smart home are constantly improving, and the dependence on the network is becoming more and more, and intelligent lighting system emerges. Intelligent lighting system makes full use of electronic technology, communication technology and computer network technology, and uses effective management and control strategies to achieve high efficiency, environmental protection, energy saving and comfortable lighting effect. The intelligent dimming control system based on power line carrier technology can make full use of the existing power line network to transmit data, not only need to lay special cables again, but also do not occupy the valuable channel resources of wireless communication. It is in line with the characteristics of home network communication. At the same time, the cost of power line modulation and demodulation module is far lower than that of various wireless modules (such as ZigBee, Wi Fi, 2.4G Etc.), this undoubtedly becomes one of the best solutions to understand the data transmission medium in smart home system.

Key words: intelligent lighting system, power line carrier technology, power line modulation and demodulation module

1 现状与发展

刘念杰[2]指出,电力线载波通信(Power Line Carrier),简称PLC,是电力系统特有的通信方式。它将有用信息调制成高频载波信号后加载到电力线上,以配电线路作为通信媒介,实现控制报文、语音、图像等数据的远距离传输。以前的PLC技术主要应用在高压远距离调度系统,传输速度较低,随着Internet 的飞速发展,低压电力线载波技术开始在高速数据业务中得到应用,通过复用最为普遍的电力线网络资源,在达到很广的覆盖范围的同时降低了投资成本,并且具有连接方便、见效快、传输速率高等优点。目前,电力线载波通信技术在 Internet宽带接入、家庭局域网、远程抄表、智能家居、照明控制等领域的应用再次成为国内外广泛关注的焦点。

吕英杰[4]指出,在高压电力线载波通信方面,“十五”规划要求重点研究特高压电力线载波高频信号传输特性、高频耦合特性以及噪声特性等问题和关键技术,期间成功显著。到“八五”计划初期,全国110kV及以上电力线载波话路已达26万km,目前已达65万km。电力线载波名副其实地成为高压电力系统应用最为广泛的通信手段。

吕英杰[4]也介绍到低压电力线载波方面,由于对市场占有的敏感性和自身研发实力的不成熟,国内厂商主要集中于策划PLC整体应用解决方案,更多的是采用国外研制的芯片。由于这些芯片是针对国外电网环境特点研发的,而国内电网环境恶劣,存在电力线信道高衰减、强干扰和波动范围大等特点,导致在早期的实际应用中,效果并不好,数据采集的成功率和实时性不能完全满足实际通信的需求。

剩余内容已隐藏,您需要先支付 10元 才能查看该篇文章全部内容!立即支付

以上是毕业论文文献综述,课题毕业论文、任务书、外文翻译、程序设计、图纸设计等资料可联系客服协助查找。